SIL-CO-SIL® products are produced from high purity silica which is precision ground to top sizes ranging from 40 to 250 microns. These ground silicas are inherently inert, white, bright, have low moisture and are at least 99.4% SiO2.

Special processing techniques assure controlled particle size distribution, which means elimination of excessive coarse and fine particles. This makes SIL-CO-SIL®ground silicas ideal for plastics and rubber, polishes and cleansers, paints, ceramic frits and glazes, fiberglass, precision castings and more.

Traditional Ceramics
In sanitaryware, tile, dishware, electrical insulators and frits the chemical purity and consistent particle size distribution of SIL-CO-SIL Ground Silica ensures white ceramics with consistent slip viscosity and excellent firing characteristics.
gdplate.jpg (11337 bytes)
Thermoset Plastics
In laboratory bench tops, epoxy molding and potting compounds, and in various phenolic and polyester compounds the consistent particle size distribution of SIL-CO-SIL Ground Silica allows for high loadings with minimal viscosity increase.
sil-circuit.jpg (19814 bytes)
Traffic Paint
Silica is an excellent filler for traffic paint because of its natural hardness and chemical resistance. SIL-CO-SIL Ground Silica is specified because of its high brightness and low oil absorption.
gdroad.jpg (7494 bytes)
Textile Fiberglass
Silica is a critical raw material in the manufacture of textile fiberglass. The chemical consistency and tight particle size distribution of SIL-CO-SIL Ground Silica makes it an industry standard.
boat.jpg (9123 bytes)

How to select a product.

The number in each product name reflects the U.S. standard for expressing sieve openings; typically 98% of the grade is finer than the number expressed in micrometers (microns).
EXAMPLE: SIL-CO-SIL 75 means typically 98% or more ground silica will pass a 75 micron screen.
For finer micron sizes, see our MIN-U-SIL® brand product.

For sizes, performance characteristics, chemical analysis, properties and applications recommendations, contact our technical support department at: (800) 345-6170 toll free

Click here to access our Product Index
 

Home   |  About Us   |  Applications   |  Locations   |  Products   |  Info Center

 
U.S. Silica Company
PO Box 187   Berkeley Springs,  WV   25411
Phone: 800-243-7500    Fax: 304-258-8295   email:  sales@ussilica.com